BadThink DoubleSpeak

I realize it's been a while since I've written a political diatribe. I haven't really felt the need prior to today due to the common lunacy not requiring further commentary. It's become laughable due to the ineptitude of the leftist echo chamber. Then two things happened. It's looking more and more possible for the president to be removed. Secondly, Charlottesville.

These two seemingly unrelated subjects have become relevant due mostly to the fact that they have both become possible by the actions of the forth estate. The media has covered the actions of the antifreedom movement and worshiped at the altar of communism. They are responsible for the suppression of free speech and supporting the spread of mob rule. What they don't understand is the depth of the precipice they now stare into. For the first time in the history of our country, the abyss is staring back, silently. If this behavior continues, Clinton's rules will be applied.

The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

It's still a bit early to do something for the common person, but for the authorities, they are sorely lacking in their response to these actions. The best thing that can come of action is that one of the groups continues to hate them. Inaction on the part of law enforcement pretty much guarantees hatred from both sides. That is the worst of all possibilities for law enforcement. Alienating the people that do pay taxes, put out blue lights on their porches and lend support to officers without question is a horrible choice. If that grass roots support stops, I'm not sure what the extent of the fallout will be. We've had 6 officers shot this weekend and not much publicity or angst over it among the regular citizen. I'm afraid the slide has begun. The mistrust and hatred the common man has for the feds could become shouldered by local law enforcement.

The people never give up their liberties but under some delusion.  

  Edmund Burke County Meeting of Buckinghamshire (1784)

War is Peace

Freedom is Slavery

Ignorance is Strength 

-1984

The youth and counter culture of today are fighting logic and morality at an unforgiving rate. By the end of the decade, we may be in a shooting war with our countrymen and women. Who do you think would benefit from that? A distracted and frightened populace will clamor for protection and freely give up liberty to stop the killing. It's just a matter of time at this point. As Matt Bracken has said so harshly, we are a single mag dump away from a civil war. Had it happened at Charlottesville, This might be a very different post. 

As far as the Trump Presidency goes, I had hoped that he might have gotten some traction and actually done a 10th of what was promised. Nope, not even close. He is mired in his poor choices for cabinet and can't make anything happen while the right and left in office oppose him. I pretty much expected such, but was cautiously optimistic. If they remove him from office, all bets are off. I cannot guess at the outcome. Consider what would have happened if they removed Obama and add in trillions of rounds of ammo and millions of guns that the obama supporters didn't have. Your guess is as good as mine. 

It's time to pick up your training tempo and consider your options for best defense if you are caught out in a riot. Might even be good camo to have a black hat and scarf in your vehicle to blend in and evade the opposition. There are so many options and strategies out there that we need to consider them all when things get dire. It's high time to hope for the best and prepare for the worst.

Most importantly, stay off the enemies' radar. Lives have been ruined by misidentified protestors and death threats have been levied.

AR optics/Failures discussion.

Ryan over at Totalsurvivalist.com has a great discussion thread about AR optics and failures. This has been hashed out many times on many pages with both professionals and mall ninja's alike. Optics fail, regardless of manufacturer or use. I've seen every manufacturer and optic made fail in one way or another. I've personally seen simple temperature differential fog lenses and make a an AR into a nice club. Rain can also cause some issues with some fogging. Ryan has a ton more formal military training than I do, and that's really important. The adverse conditions he's seen are a testament to the suitability of the RDS and AR platforms.

As with all electronic/mechanical devices, the more complex, the more issues they have. I'm no expert, but with 15 years of helping at a gun shop that is near a military training facility that trains the tip of the spear, you do pick things up from those guys. There is also a military testing/research facility nearby as well. I have the opportunity of interacting with some very interesting people. They have some interesting input on optics and use. I'm assisting with advanced classes here and there, but I'm still a ways away from teaching the high speed stuff.

I suppose optics are the first thing to consider. I'm pretty big on the Aimpoint M3 for close to a decade. In that time, I've seen every other manufacturer fail on my rifle or another. The only other Optic I've never had a failure out of is a Trijicon Tri-Power. I know and have seen others fail, by not the one I have. It's been run on full auto, 9mm carbines, 308 rifles and many other riles. It's not the most robust unit, but it works in most conditions. The M3 only has one major drawback, and that's the battery it uses is a non typical one, and non rechargeable. It's fairly heavy as well.

I do have a few cheaper models, the Vortex Sparc II and a Black Spider LLC smallish red dots. They seem to work just fine. They are on some training guns my boys use. Keeping them light is important. As the technology has increased I've kept the M3's due to the longevity and the fact that I'm used to them. I see no reason to change yet, it hasn't advanced enough or been tested enough for me to forsake the current units I have.

 I know a plethora of military rifleman that swear by the Eotech's, and I know many that despise them. The only optic that I know of that everyone is fond of is the ACOG. It's ultra clear optics and mid range magnification is head and shoulders above most. I know you can get similar results with a magnifier, but it's not nearly the same. The single best optic I've ever used has by far been the Elcan Specter DR. Sooner or later someone is going to come up with a similar design for less money, and then I will go for it. Until then, I just can't justify the expense.

Another often overlooked issue would be BUIS. Back Up Iron Sights are critical IMO. If you have a Red Dot Sight failure, you will be guessing POI unless you have another method of aiming. All my primary weapons have BUIS with Trijicon front sight posts. In very low light conditions, this is critical to be able to aim with confidence when your target is in the shadows and doesn't allow you to silhouette your front sight post. Another thing all my battle rifles have is a quick disconnect for the RDS. If you break the glass or get dust/mud/blood on the glass your sights are useless as well unless they are offset. Being able to quick release your glass can be important. I've been in that position and it sucks. Raining like hell, sloshing through mud puddles and go prone into a bog and fill your optics with muck.  If you use plastic backup sights, you better stick with airsoft.

AR platform failure points. My goodness how we can count the ways. It takes so little to make a fully functional rifle into a paperweight. I've found that spending the money on a mid to high end rifle generally makes good sense. The major manufacturers spend the right money on the parts that must work properly for reliable function even in abusive environments. I also test my rifles to failure with poor care just to see how well they can handle the grime. My main 5.56 rifle can handle between 2000 and 2400 rounds without cleaning before failure. I spot cleaning every 500 rounds or so does make it last indefinitely. Pull the BGC, shake it off and wipe it down with CLP, brush out the lugs and chamber with a brush, lube liberally and toss it back together. If I run it with a can, the less rounds to failure.

My backup gun will only run 1600-1800 rounds til failure. I've since changed out the buffer spring and extractor spring, so that should help it along. The Chamber in that rifle is a bit rougher than my main rifle, so I put some of the issue as being caused by the chamber slowing extraction slightly. Need to test it again with the changes to see.


The most common "fatal" issue I see in classes and at the range is popped primers. They fall into the works and generally jam up the trigger. This is a crappy jam because it's fatal and cannot be fixed in a firefight. I use reloads most of the time, so it's something I have seen often with my rifle. They can also jam up in the lugs.

The most common non fatal issue is a stuck case. A new extractor spring or extractor will generally fix this. The next common is out of battery failure. This is mainly due to a dirty chamber, wrong buffer/spring combo or bad ammo. Short stroking, not ejecting the old or not stripping a new one is usually caused by a dry rifle. AR's like to be wet with lube. A plugged gas tube can also be to blame, but I've never seen one happen with brass/non russian ammo. Bad gas rings can cause this as well. If you can stand your BCG on the bolt end with it extended and it will not drop to the unlock position without pushing down, your rings are good. You can fix it in the field by changing a single ring if you are in a pinch. That's usually enough to get it back running again. Double feeds are due to magazine issues or operator error.

Last year when I took a vehicle class, I had SEVERAL issues. I know better than to change stuff right before a class, but I did it anyway. My Geisselle  trigger kept spitting pins, My castle nut came loose and I kept jamming cases due to my inability to properly clean the case lube off reloads I was using. I also only had a couple months on a 2 point sling I brought. I used to use the backplate for my rear sling attachment, but it would cause me issues when doing clearance drills. Had to move it back to the stock. I tested my RDS battery before I left, but on the morning of the class, it was dead. Luckily I keep several spares in the gun. Had it not been a class, and had been a real need for the rifle, without BUIS I would have been in trouble.

Mags cause more issues than all the other items listed here combined. I've seen all mags of every type and manufacturer fail. My best advice is to beat up and cycle thru the same mags you keep for duty/carrry. If you like Pmags, keep 10 newish tested mags for your primary kit and beat up a bunch of the same type and manufacturer mags in training. This ideology is two fold. It allows you to test longevity on the mags you plan to bet your life on, and it allows you to train with the identical mags you will carry. When mags go bad, it just sucks. You can fix GI mags, but plastic mags tend to split the feed lips and have to be trashed. These mags pictured below were tested and found lacking. the feed lips are bent and they are unusable in this condition. The second pic is a comparison after adjustment. Filing down the front edge also makes them more reliable and less prone to jam with abuse. I don't personally do so, but I know guys forced to use GI mags that do it with good results.

The Mag on the right is adjusted properly, the left mag has it's feed lips bent down, making the mag useless. I use a magazine lip adjustment tool I bought from MidwayUSA.

I keep a spares kit in my Armor and another in my ammo bag. Included in the kit are gas rings, a firing pin, an extractor and extractor spring, a small tube of oil, half a tooth brush and a stuck case extractor. That's about 25-30 bucks worth of insurance. I keep Red dot sight batteries in the Hogue grip.

The receiver you use is the heart of your gun. I've seen some really weird things with messed up lowers. Buffer tubes threaded out of line, pins out of spec, mag wells too tight/loose, lug cutouts too tight/loose, etc. I've had people bring me junk receivers from brands I've never heard of that will never work right. I've seen big name high production companies with issues as well, but I've never seen an LMT lower that was out of spec enough to cause issues. Their QC is excellent. I generally buy LMT casting and internals for my battle rifles because it's a known quantity. My Bushmaster lowers were all made by LMT many moons ago. There are many other great manufacturers out there with quality products. DPMS has gotten a bad name in past years, but they do make a decent budget rifle/parts. I don't bet my life on them, but my son's rifles are about half DPMS with Bushy L prefix lowers and Spikes lowers. I do have to true up the DPMS uppers to make sure the barrel is straight, but other than that, they do fine.

The buffer tube is the next critical item. I've sold rifle to friends and had them change out the stock and tube to never get the rifle working again. The guy blamed me, and asked me to fix it. He put on some cheapo chinese tube. The threads were cut off center so the buffer had tons of parasitic drag and it was rough inside. I fixed it for him, but learned my lesson. Never trust your life on chinese junk. It's fine if you like fixing your gun at the range, but not good if you intend to fight with it.

Range Day Drills- Handgun

Spend some time letting off some steam and getting the Glock 17 that I had coated running again. I'll never use the same person to coat a firearm for me, it's been a real pain to get the thing up and running. It was a semi auto for a long time, then after I ran some of my home brew Verboten 9mm Major through it in desperation, it's back to it's reliable self. 9mm Major is just hopped up 9mm that is way past pressure limits. One load I have is a 124g 9mm bullet traveling at 1480 fps. I wasn't running that load, more like a 124g +p+ was what I used. Winchester Ranger +p+ is almost identical to this load I used. The super hot load is marked 9mm Glock Killer just to make sure I don't grab it. The cases are also a different color.

I did some standard drills, working mostly on draw and fire. I use a bird's tweet as my "GO" for the exercise. Here are the exercises I did yesterday with about 300 rounds of fire.

Warm up- 1 round each at 4 2" circles from 7 yards. Slow fire at first, increase tempo slightly when you start back to the first circle. Reload from your belt at each start over. This expends 12 rounds and gets you a light warm up. You don't get a warm up for gun fights, so I limit mine severely.

Draw and fire- 10 pushups, 10 situps then set up 7 yards from target in the 12 O'clock position, facing the target. When I hear a bird cheep, tweet or caw, I deploy and fire 2 rounds center mass. Run to the target and mark your shots. Run back and set up in the 3 O'clock position for the same drill. You go through this drill running the 4 directions( 12, 3, 6, 9 O'clock). You should be wearing your normal attire for CCW. I had my SOE EDC belt, Bladetech Eclipse holster and Blade tech mag carrier. I was wearing a Tshirt and Blackhawk button down overshirt, unbuttoned. I recently purchased some Kuhl Renegade pants on special and was trying them out for the first time

I repeated this draw and fire exercise at 7 and 3 yards, setting the standard IDPA target up at 6'4" to the top to simulate the aggressor being significantly taller than me. Usually your adversary will choose a smaller target than themselves. I'm of medium height so I normally train for a larger opponent. I will do another set of 10 pushups and 10 sit ups between yardage change.

The wind was whipping pretty good and a couple times it pushed my shirt into my draw, causing a slight bobble. Good training for the real world. I don't top off mags, when they run dry, I do a mag change. I also run 10 round mags, just for more reloading. I repeated the drill 2x at 3 and 7 yards. This expends 32 rounds.

We are 44 rounds in, and you should be panting a bit from running and calisthenics.

Draw, Fire, Move, Fire- Set up in the 6 O'clock position, 7 yards away from the target. Wait for the bird, turn and fire 3 rounds center mass. Move to "cover" while covering the target. I use barrels that are set up at the range. I move it around to make the moving to cover the most difficult possible. Moving at 45 degrees away from the target while covering the target is about as hard as it gets. Once you reach cover, head shot. I'm usually 30-40 feet from the target for the head shot.

Move your "cover" each time you run this drill. I will also move my start position and direction from target. I ran this drill about 10 times. It's important to drill yourself that cover is life. Accuracy is king, so mark your shots after each drill to make you think about your hits. 30 rounds

Next is the fun.
Shooting to cover- Setup as last drill, except this time, draw and fire all the way to cover. Aimed fire, try not to lose any rounds off target. If you're losing rounds, slow down. Once I get to cover, I run two more rounds into center mass from cover. This expends 10-12 rounds per run.

Shoot to target. Start from behind cover and fire while advancing to the target. Setup in any direction you want, wait for the bird, advance while directing accurate fire on target. I usually start hitting center mass with the first rounds, then adjust fire to head and hips as I advance. Once you get good at this, move barrels or cones into your path, making you have to move side to side while advancing. One of the last things I do for this drill is to double stack barrels and run this course of fire while while having the target obstructed by the barrels. 12-14 rounds per run. This drill can be run Left to Right or Right to Left through the barrels, or you can do figure 8's around the barrel while firing. Whatever you like.

The object is to keep your pulse rate and breathing up while you practice your shooting skills. A standard square range is all that's needed. If you have a training partner, have them move things around on you while you are set up to keep you guessing.

I ran the last course of fire with the REPR twice, transitioning to the handgun for a 2 center/1 headshot when getting close to the target.

The new Ruger 10/22 take down was used today as well. Ran a couple runs shooting to cover with it. I also ran the Glock 22 from the Minuteman Cache #2 after installing Night Sights on it. It's now shooting 3 inches low at 7 yards. Ugh.

My shooting wasn't as good as expected, but with the issues I had getting the 17 to run, plus the 22's sights being off, I only lost 3 rounds off target, usually when trying for the head shot. I was pretty beat by the last few runs, and it showed.

Try to fine a range that allows you to shoot and move. If you're standing still and shooting at the same target, in the same direction, from the same shooting position, you're plinking, not training.